manualshive.com logo in svg

Yamaha YBR125ESD, Руководство пользователя, Страница: 61 / 82

Поделиться
Скачать
Yamaha YBR125ESD Скачать руководство пользователя страница 61

PERIODIC MAINTENANCE AND ADJUSTMENT

6-28

6

TIP

The electrolyte should be between the
minimum and maximum level marks.

4. If the electrolyte is at or below the

minimum level mark, add distilled
water to raise it to the maximum
level mark. 

NOTICE:

 Use only

distilled water, as tap water con-
tains minerals that are harmful
to the battery.

 [ECA10611]

5. Check and, if necessary, tighten

the battery lead connections and
correct the breather hose routing.

6. Install the panel.

To store the battery

1. If the vehicle will not be used for

more than one month, remove the
battery, fully charge it, and then

place it in a cool, dry place.

NOTICE:

 When removing the

battery, be sure the key is
turned to “OFF”, then discon-
nect the negative lead before
disconnecting the positive lead.

[ECA16302]

2. If the battery will be stored for more

than two months, check the specif-
ic gravity of the electrolyte at least
once a month and fully charge the
battery whenever necessary.

3. Fully charge the battery before in-

stallation.

4. After installation, make sure that

the battery leads are properly con-
nected to the battery terminals and
that the breather hose is properly
routed, in good condition, and not
obstructed. 

NOTICE:

 If the

breather hose is positioned in
such a way that the frame is ex-
posed to electrolyte or gas ex-
pelled from the battery, the
frame could suffer structural
and external damages.

 [ECA10601]

1. Maximum level mark

2. Minimum level mark
3. Negative battery lead (black)

4. Positive battery lead (red)

3

4

1

2

1. Battery
2. Battery breather hose

1. Battery breather hose

1

2

U51PE0E0.book  Page 28  Thursday, October 8, 2009  3:58 PM

Содержание YBR125ESD



















































































Отзывы:

Нет отзывов