Yamaha YBR125 Custom, Руководство по обслуживанию

Страница: 182 / 218

Inspection of socket connector
ELEC
Inspection of the switch
Inspection method of the switch
Check the conduction of terminals with multitester.
If any poor condition is found, replace the switch im
ediately.
-
m
Multitesler
90890-03112
Note:
Start the switch several times to cheak.
Before checking,turn the multitester to
“
O
”
.
When checking, the used voltage gauge should
be set to proper position for check. The conduction
inspection of every switch should be done by
Ω ×1.
Every switch terminal in the manual
Inner connecting terminal abbreviated drawing of switch
(such as: main switch, handlebar switch, brake switch an
lighting switch etc.), see left figure, often appear in this
manual. The switch position is recorded in the left column
of terminal connection table,which the wire color connec-
ting terminal is written down at the upper column.
“
O-O
”
means the conduction between the terminals
is formed, that is the sealing conduction circuit of every
switch is formed on it's position,conduction is formed at
“
ON
”
position which is between the
“
Brown
”
term-
inal and the
“
Red
”
one.
7-6