2
En
■
Connecting the dock cable
1 Connect one of the plugs of the dock
cable to the dock cable terminal of this
unit firmly.
2 Make sure the power of the YBA-10
compatible component (AV receiver,
etc.) is turned off.
3 Connect the other plug of the dock
cable to the DOCK terminal of the
YBA-10 compatible component (AV
receiver, etc.).
•
Be sure to connect the plugs of the dock cable
firmly to both the dock cable terminal of this
unit and the DOCK terminal of theYBA-10
compatible component (AV receiver, etc.).
When the connection is loose, this unit may
output some unwanted noise.
•
The YBA-10 is not compatible with all AV
receivers or other components, even those
equipped with DOCK terminals. For details, see
the owner’s manual of your DOCK terminal-
equipped components.
Connect the
plug with the
side with the
release
button facing
upward.
Notes
DOCK
00_YBA-10.book Page 2 Wednesday, February 6, 2008 10:49 AM
