Yamaha Y15ZR Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 96

Yamaha Y15ZR Скачать руководство пользователя страница 64

Periodic maintenance and adjustment

7-19

7

Tire inspection

The tires must be checked before each
ride. If a tire tread shows crosswise
lines (minimum tread depth), if the tire
has a nail or glass fragments in it, or if
the sidewall is cracked, contact
a Yamaha dealer immediately and
have the tire replaced.

WARNING

EWA10583

It is dangerous to ride with a
worn-out tire. When a tire tread
begins to show crosswise lines,
have a Yamaha dealer replace
the tire immediately.
The replacement of all wheel
and brake-related parts, includ-
ing the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowl-
edge and experience to do so.
Ride at moderate speeds after
changing a tire since the tire
surface must first be “broken
in” for it to develop its optimal
characteristics.

Tire information

This model is equipped with tubeless
tires and tire air valves.
Tires age, even if they have not been
used or have only been used occasion-
ally. Cracking of the tread and sidewall
rubber, sometimes accompanied by
carcass deformation, is an evidence of

ageing. Old and aged tires shall be
checked by tire specialists to ascertain
their suitability for further use.

WARNING

EWA10462

The front and rear tires should be of
the same make and design, other-
wise the handling characteristics of
the vehicle may be different, which
could lead to an accident.

After extensive tests, only the tires list-
ed below have been approved for this
model by Yamaha.

1. Tire sidewall

2. Tire wear indicator

3. Tire tread depth

Minimum tire tread depth (front and
rear):

1.0 mm (0.04 in)

Front tire:

Size:

90/80-17M/C 46P

Manufacturer/model:

IRC/NF67

Rear tire:

Size:

120/70-17M/C 58P

Manufacturer/model:

IRC/NF67

«
...
62
63
64
65
66
...
»

Содержание Y15ZR

































































































Отзывы:

Нет отзывов