manualshive.com logo in svg

Yamaha XVS1300AW 2007, Руководство пользователя

Поделиться
Скачать
Yamaha XVS1300AW 2007 Скачать руководство пользователя страница 19

INSTRUMENT AND CONTROL FUNCTIONS

3-3

3

To lock the steering

1. Turn the handlebars all the way to

the left.

2. Push the key in from the “OFF” po-

sition, and then turn it to “LOCK”
while still pushing it.

3. Remove the key.

To unlock the steering

Push the key in, and then turn it to
“OFF” while still pushing it.

WARNING

EWA10060

Never turn the key to “OFF” or
“LOCK” while the vehicle is moving,
otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident. Make
sure that the vehicle is stopped be-
fore turning the key to “OFF” or
“LOCK”.

EAU34341

 (Parking)

The steering is locked, and the taillight,
license plate light and auxiliary light are
on. The hazard lights and turn signal
lights can be turned on, but all other
electrical systems are off. The key can
be removed.
The steering must be locked before the
key can be turned to “

”.

CAUTION:

ECA11020

Do not use the parking position for
an extended length of time, other-
wise the battery may discharge.

1. Push.
2. Turn.

1. Push.
2. Turn.

U12C20E0.book  Page 3  Wednesday, October 18, 2006  3:54 PM

Содержание XVS1300AW 2007



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды