INSTRUMENT AND CONTROL FUNCTIONS
4-6
4
EAU38626
Immo
b
ilizer system in
d
icator li
g
ht
When the key is turned to “OFF” and
30 seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
The electrical circuit of the indicator
light can be checked by turning the key
to “ON”. The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
initially when the key is turned to “ON”,
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
The self-diagnosis device also detects
problems in the immobilizer system
circuits. (See page 4-8 for an explana-
tion of the self-diagnosis device.)
EAU4290A
Multi-function meter unit
WARNING
EWA12423
Be sure to stop the vehicle
b
efore
makin
g
any settin
g
chan
g
es to the
multi-function meter unit. Chan
g
in
g
settin
g
s while ri
d
in
g
can
d
istract the
operator an
d
increase the risk of an
acci
d
ent.
The multi-function meter unit is
equipped with the following:
a speedometer
an odometer
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled on
the fuel reserve)
a clock
a self-diagnosis device
a brightness control mode
TIP
Be sure to turn the key to “ON” before
using the “SELECT” switch “
/
”
and “RESET” switch, except for setting
the brightness control mode.
1. Speedometer
2. Odometer/tripmeter/fuel reserve tripme-
ter/clock
1. “SELECT” switch “
/
”
2. “RESET” switch
U12C28E0.book Page 6 Wednesday, July 2, 2014 3:29 PM