–9–
33
Flasher relay
34
Handlebar switch lead (left)
35
Silencer
36
Throttle position sensor lead
37
Carburetor heater lead
38
Thermo switch lead
39
Starting circuit cut-off relay
40
Horn
41
Rectifire / regulator and light (re-
duce relay) lead
A Clamp the battery positive (+)
lead to the battery with battery
band.
B Connect the battery negative (–)
lead and push it in to the space
between battery box and battery.
C Push the wireharness into the
space between frame and start-
er motor relay.
D Route the rectifire / regulator
lead, wireharness and starter
motor positive (+) lead through
the out of frame bracket and fas-
ten them to the frame with a plas-
tic locking tie. The place to fix
must be between 0 mm and
10 mm from the top of the
diverging point of the lead on the
harness side whitch connected
the battery negative (–) lead.
CABLE ROUTING
SPEC
