INSTRUMENT AND CONTROL FUNCTIONS
4-4
4
Speedometer
When the key is turned to “ON”, the
speedometer needle will sweep once
across the speed range and then return
to zero in order to test the electrical cir-
cuit.
Fuel gauge
The fuel gauge indicates the amount of
fuel in the fuel tank. The needle moves
towards “E” (Empty) as the fuel level
decreases. When the needle reaches
“E”, approximately 3.4 L (0.90 US gal,
0.75 Imp.gal) remain in the fuel tank. If
this occurs, refuel as soon as possible.
When the key is turned to “ON”, the fuel
gauge needle will sweep once across
the fuel level range and then return to
the current amount in order to test the
electrical circuit.
Odometer, tripmeters and fuel re-
serve tripmeter
Push the “
” side of the “SELECT”
switch to switch the display between
the odometer mode “ODO”, the tripme-
ter modes “TRIP A” and “TRIP B” in the
following order:
ODO
→
TRIP A
→
TRIP B
→
ODO
TIP
Push the “
” side of the “SELECT”
switch to switch the display in the re-
verse order.
If the fuel level warning light comes on
(see page 4-2), the odometer display
will automatically change to the fuel re-
serve tripmeter mode “F-TRIP” and
start counting the distance traveled
1. Speedometer
1
1. Fuel gauge
1
1. Odometer/tripmeter/fuel reserve tripmeter
1
U1BH10E0.book Page 4 Tuesday, December 8, 2009 4:47 PM