Yamaha XT660RW Скачать руководство пользователя

Страница: 26 / 94

INSTRUMENT AND CONTROL FUNCTIONS

3-10

EAUM1791

Fuel tank cap

To remove the fuel tank cap

1. Open the fuel tank cap lock cover.
2. Insert the key into the lock and turn

it 1/4 turn clockwise. The lock will
be released and the fuel tank cap
can be removed.

To install the fuel tank cap

1. Push and install the fuel tank cap

into position with the key inserted
in the lock.

2. Turn the key counterclockwise to

the original position, and then re-
move it.

NOTE:

The fuel tank cap cannot be installed
unless the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly installed and locked.

WARNING

EWA11140

Make sure that the fuel tank cap is
properly installed before riding.

EAU13211

Fuel

Make sure that there is sufficient fuel in
the tank. Fill the fuel tank to the bottom
of the filler tube as shown.

WARNING

EWA10880

●

Do not overfill the fuel tank, oth-
erwise it may overflow when the
fuel warms up and expands.

●

Avoid spilling fuel on the hot en-
gine.

1. Fuel tank cap lock cover

2. Unlock.

1. Fuel tank filler tube

2. Fuel level

U5VK21E0.book Page 10 Tuesday, July 18, 2006 1:12 PM

ProCarManuals.com

Содержание XT660RW































































































Результаты поиска

Содержание XT660RW

Отзывы:

Похожие инструкции для XT660RW

Бренды по названию

Популярные бренды

Yamaha XT660RW, Руководство пользователя

Результаты поиска

Содержание XT660RW

Отзывы:

Похожие инструкции для XT660RW

Бренды по названию

Популярные бренды