Yamaha XT250F 2014, Руководство пользователя

Страница: 75 / 90

PERIODIC MAINTENANCE AND ADJUSTMENT
7-37
1
2
3
4
5
6
7
8
9
10
11
12
wheel so that it is on the ground.
5. Tighten the axle nut to the speci-
fied torque.
EAU25852
Troubleshooting
Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur dur-
ing operation. Any problem in the fuel,
compression, or ignition systems, for
example, can cause poor starting and
loss of power.
The following troubleshooting chart
represents a quick and easy procedure
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look like
Yamaha parts, but they are often inferi-
or, have a shorter service life and can
lead to expensive repair bills.
WARNING
EWA15142
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the ar-
ea, including pilot lights from water
heaters or furnaces. Gasoline or
gasoline vapors can ignite or ex-
plode, causing severe injury or
property damage.
Tightening torque:
Axle nut:
85 Nm (8.5 m·kgf, 61 ft·lbf)
1YB-9-22.book 37 ページ ２０１４年２月２８日 金曜日 午前１０時２１分