Yamaha XT250 2020 страница 23 Скачать руководство пользователя | Manualshive

Страница: 23 / 100

background image

Instrument and control functions

4-4

1

2

3

4

5

6

7

8

9

10

11

12

one after the other and then disap-
pear, in order to test the electrical
circuit.



To switch the speedometer and
odometer/tripmeter displays be-
tween miles and kilometers, press
the “SELECT” button for at least
two seconds.

Speedometer

The speedometer shows the riding
speed.

Odometer and tripmeter modes

The odometer shows the total distance
traveled.
The tripmeters (top and bottom) show
the distance traveled since they last re-
set and the fuel reserve tripmeter
shows the distance traveled since the
fuel level warning light came on.

TIP



The odometer will lock at 999999.



The tripmeter (top) will reset after
999.9 is reached.



The tripmeter (bottom) will reset
after 999999.9 is reached.



The tripmeter (top) shows on the

display all the time, even if the trip-
meter (bottom) is not showing.

In normal operation, when the “SE-
LECT” button is pushed the tripmeter
“TRIP (top)” flashes or the display
switches between the odometer “ODO”
mode and the tripmeter “TRIP (bot-
tom)” mode in the following order:

“ODO”



“TRIP (bottom)”



“ODO”

When approximately 1.8 L (0.48 US gal,
0.40 Imp.gal) of fuel remains in the fuel
tank, the fuel level warning indicator
flashes and the odometer “ODO” or trip-
meter “TRIP (bottom)” automatically
changes to the fuel reserve tripmeter
mode “F-TRIP” and starts counting the
distance traveled from that point.
In this case, pushing the “SELECT” but-
ton flashes the tripmeter “TRIP (top)” or
switches the display between the fuel
reserve tripmeter “F-TRIP”, tripmeter
“TRIP (botttom)”, and the odometer
“ODO” in the following order:

“F-TRIP”



“TRIP (bottom)”



“ODO”



“F-TRIP”

To reset a tripmeter, push the “SE-
LECT” button to select the tripmeter
you want to reset (the selected tripme-
ter will flash). Push the “RESET” button
for one second within the five seconds
of flashing to reset that tripmeter.
If you do not reset the fuel reserve trip-
meter manually, it will reset itself auto-
matically and the display will return to
the prior mode after refueling and trav-
eling 5 km (3 mi).

TIP

The display cannot be switched back to
“F-TRIP” after the fuel reserve tripmeter
has been reset.

1. Fuel reserve tripmeter

1

B1U-9-12_1.book 4 ページ２０２２年４月７日　木曜日　午後２時２１分

«
...
21
22
23
24
25
...
»

Содержание XT250 2020





































































































Отзывы:

Нет отзывов

Похожие инструкции для XT250 2020

750 Sport Bevel Heaven

Бренд: Ducati Страницы: 235

Бренд: Honda Страницы: 112

Бренд: R&G Страницы: 8

Бренд: N-Com Страницы: 6

Rocky Mountain-EXP SB-1

Бренд: Wolfman Страницы: 7

Бренд: R&G Страницы: 14

Бренд: Memphis Shades Страницы: 2

Бренд: BMW Motorrad Страницы: 231

LIX9U0003740299

Бренд: X-lite Страницы: 116

Бренд: Toolland Страницы: 25

Бренд: Yamaha Страницы: 390

Бренд: Yamaha Страницы: 468

Бренд: Yamaha Страницы: 364

Бренд: CRATONI Страницы: 44

Бренд: REV'IT Страницы: 48

Бренд: Baotian Страницы: 26

Бренд: MT Helmets Страницы: 116

Бренд: Benelli Страницы: 529

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды