Yamaha XSR 700, Руководство пользователя

Страница: 78 / 98

Perio d ic maintenance an d a d justment
6-33
6
use a fuse of a hi g her ampera g e
ratin g than recommen d e d to
avoi d causin g extensive d am-
a g e to the electrical system an d
possi b ly a fire.
[EWA15132]
3. Turn the main switch on and turn
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
5. After the fuse is changed, place
the battery cover in the original
position, and then install the bolts.
6. Install the diagnostic connector by
pushing it downward.
7. Install the seat holder by installing
the bolts, and then tighten the
bolts to the specified torque.
8. Install the seat.
EAU34387
Replacin g the hea d li g ht b ul b
This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
ECA26690

Do not touch the g lass part of
the hea d li g ht b ul b . Otherwise
the luminosity an d the life of the
b ul b may b e a d versely affecte d .

Thorou g hly clean off any d irt,
oil, or fin g erprints from the b ul b
usin g a cloth moistene d with al-
cohol or thinner.

Do not use a hea d li g ht b ul b of a
watta g e hi g her than specifie d .

Do not affix any type of tinte d
film or stickers to the hea d li g ht
lens.
Specifie d fuses:
Main fuse:
30.0 A
Auxiliary fuse:
2.0 A
Headlight fuse:
15.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
10.0 A
Parking lighting fuse:
7.5 A
Radiator fan motor fuse:
10.0 A
ABS motor fuse:
30.0 A
ABS solenoid fuse:
20.0 A
Fuel injection system fuse:
10.0 A
ABS control unit fuse:
7.5 A
Backup fuse:
7.5 A
Backup fuse 2:
10.0 A
Ti g htenin g torque:
Seat holder bolts:
7 N·m (0.7 kgf·m, 5.2 lb·ft)
UBCNE0E0.book Page 33 Monday, February 4, 2019 10:04 AM