Yamaha XMax YP400RXMAx YP400RA Скачать руководство пользователя

Страница: 36 / 92

INSTRUMENT AND CONTROL FUNCTIONS

3-20

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on.
4. Keep the front or rear brake applied.
5. Push the start switch.
Does the engine start?

With the engine still off:
6. Move the sidestand up.
7. Keep the front or rear brake applied.
8. Push the start switch.
Does the engine start?

With the engine still running:
9. Move the sidestand down.
Does the engine stall?

The system is OK. The scooter can be ridden.

The sidestand switch may not be working correctly.
The scooter should not be ridden until
checked by a Yamaha dealer.

YES

The brake switch may not be working correctly.
The scooter should not be ridden until
checked by a Yamaha dealer.

•

The vehicle must be placed on the center-

stand during this inspection.

•

If a malfunction is noted, have a Yamaha

dealer check the system before riding.

WARNING

U1SDE1E0.book Page 20 Monday, September 23, 2013 3:55 PM

Содержание XMax YP400RXMAx YP400RA





























































































Результаты поиска

Содержание XMax YP400RXMAx YP400RA

Отзывы:

Похожие инструкции для XMax YP400RXMAx YP400RA

Бренды по названию

Популярные бренды

Yamaha XMax YP400RXMAx YP400RA, Руководство пользователя

Результаты поиска

Содержание XMax YP400RXMAx YP400RA

Отзывы:

Похожие инструкции для XMax YP400RXMAx YP400RA

Бренды по названию

Популярные бренды