Yamaha XMAX YP250R 2013, Руководство пользователя

Страница: 83 / 94

SCOOTER CARE AND STORAGE
7-1
7
EAU37834
Matte color caution
NOTICE
ECA15193
Some mo d els are equippe d with
matte colore d finishe d parts. Be
sure to consult a Yamaha d ealer for
a d vice on what pro d ucts to use b e-
fore cleanin g the vehicle. Usin g a
b rush, harsh chemical pro d ucts or
cleanin g compoun d s when cleanin g
these parts will scratch or d ama g e
their surface. Wax also shoul d not
b e applie d to any matte colore d fin-
ishe d parts.
EAU26096
Care
While the open design of a scooter re-
veals the attractiveness of the technol-
ogy, it also makes it more vulnerable.
Rust and corrosion can develop even if
high-quality components are used. A
rusty exhaust pipe may go unnoticed
on a car, however, it detracts from the
overall appearance of a scooter. Fre-
quent and proper care does not only
comply with the terms of the warranty,
but it will also keep your scooter look-
ing good, extend its life and optimize
its performance.
Before cleanin g
1. Cover the muffler outlet with a
plastic bag after the engine has
cooled down.
2. Make sure that all caps and cov-
ers as well as all electrical cou-
plers and connectors, including
the spark plug cap, are tightly in-
stalled.
3. Remove extremely stubborn dirt,
like oil burnt onto the crankcase,
with a degreasing agent and a
brush, but never apply such prod-
ucts onto seals, gaskets and
wheel axles. Always rinse the dirt
and degreaser off with water.
Cleanin g
NOTICE
ECA10784

Avoi d usin g stron g aci d ic wheel
cleaners, especially on spoke d
wheels. If such pro d ucts are
use d on har d -to-remove d irt, d o
not leave the cleaner on the af-
fecte
d area any lon g er than in-
structe d . Also, thorou g hly rinse
the area off with water, imme d i-
ately d ry it, an d then apply a cor-
rosion protection spray.

Improper cleanin g can d ama g e
plastic parts (such as cowlin g s,
panels, win d shiel d s, hea d li g ht
lenses, meter lenses, etc.) an d
the mufflers. Use only a soft,
clean cloth or spon
g e with wa-
ter to clean plastic. However, if
the plastic parts cannot
b e thor-
ou g hly cleane d with water, d i-
lute d mil d d eter g ent with water
may b e use d . Be sure to rinse
U2DLE1E0.book Page 1 Friday, November 8, 2013 7:45 PM