Yamaha XMAX CZD300-A, Руководство пользователя

Страница: 52 / 112

Instrument an d control functions
5-22
5
d ent. Be sure to ti g hten the
screws to the specifie d torque.
[EWA15511]
5. Place the bolt access covers, and
then install the quick fasteners.
EAU46833
Han d le b ar position
The handlebar can be adjusted to one
of two positions to suit the rider’s pref-
erence. Have a Yamaha dealer adjust
the position of the handlebar.
EAU14895
A d justin g the shock a b sor b er
assem b lies
WARNING
EWA10211
Always a d just b oth shock a b sor b er
assem b lies equally, otherwise poor
han d lin g an d loss of sta b ility may re-
sult.
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
ECA10102
To avoi d d ama g in g the mechanism,
d o not attempt to turn b eyon d the
maximum or minimum settin g s.
Adjust the spring preload as follows.
Turn the adjusting ring in direction (a)
to increase the spring preload.
Turn the adjusting ring in direction (b)
to decrease the spring preload.

Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.

Use the spring preload adjusting
tool included in the tool kit to
make this adjustment.
1. Bolt
Ti g htenin g torque:
Windshield bolt:
8 N·m (0.8 kgf·m, 5.9 lb·ft)
1
1
1. Handlebar
1
UB5XEYE0.book Page 22 Monday, November 16, 2020 8:46 AM