manualshive.com logo in svg

Yamaha XMAX 125i 2005, Руководство пользователя

Поделиться
Скачать
Yamaha XMAX 125i 2005 Скачать руководство пользователя страница 15

EAU10972

Immobilizer system

1. Master key
2. Keys

This vehicle is equipped with an
immobilizer system to help prevent
theft by re-registering codes in the
standard keys. This system consists
of the following.

●

a code re-registering key (with a
red bow)

●

two standard keys (with a black
bow) that can be re-registered
with new codes

●

a transponder (which is installed
in the code re-registering key)

●

an immobilizer unit

●

an ECU

●

an immobilizer system indicator
light (See page 3-3.)

The key with the red bow is used to
register codes in each standard key.
Since re-registering is a difficult pro-
cess, take the vehicle along with all
three keys to a Yamaha dealer to have
them re-registered. Do not use the
key with the red bow for driving. It
should only be used for re-registering
the standard keys. Always use a stan-
dard key for driving.

ECA11820

CAUTION:

●

DO NOT LOSE THE CODE RE-
REGISTERING KEY! CONTACT
YOUR DEALER IMMEDIATELY IF
IT IS LOST! If the code re-regis-
tering key is lost, registering new
codes in the standard keys is
impossible. The standard keys
can still be used to start the vehi-
cle, however if code re-registe-
ring is required (i.e., if a new
standard key is made or all keys
are lost) the entire immobilizer
system must be replaced. There-
fore, it is highly recommended to
use either standard key and

keep the code re-registering
key in a safe place.

●

Do not submerse any key in
water.

●

Do not expose any key to
excessively high temperatures.

●

Do not place any key close to
magnets (this includes, but not
limited to, products such as
speakers, etc.).

●

Do not place heavy items on
any key.

●

Do not grind any key or alter its
shape.

●

Do not disassemble the plastic
part of any key.

●

Do not put two keys of any
immobilizer system on the
same key ring.

●

Keep the standard keys as well
as keys of other immobilizer
systems away from this vehi-
cle’s code re-registering key.

●

Keep other immobilizer system
keys away from the main
switch as they may cause sig-
nal interference.

3

INSTRUMENT AND CONTROL FUNCTIONS

3-1

1B9-F8199-E0.qxd  14/10/2005 11:06  Página 3-1

Содержание XMAX 125i 2005













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды