Yamaha XLT800 WaveRunner 2004 Скачать руководство пользователя страница 51

Страница: 51 / 136

2-24

6. The buzzer will sound twice. The warn-

ing light and “SET” blink for 2 seconds.
Then the display turns to “CLOCK” and
shows the time.

NOTE:

If the battery terminal is disconnected, the
clock will be reset to 12:00.

EJU01230

Hour meter

The hour meter is provided to make it

easy to follow the maintenance schedule.

The meter shows how many hours of

engine operation have elapsed since the
watercraft was new.

To show the hour meter, press the

“MODE” button until the display shows
“HOUR.M” while the engine is running.

EJU01231

Trip timer

The trip timer is provided for counting the

time traveled on a given trip.

To show the trip timer, press the “MODE”

button until the display shows “TRIP.T” while
the engine is running.

Minutes

Seconds

1. When the display shows “TRIP.T,” press

the “A/SET” button to start counting. The
buzzer will sound once.

2. Press the “A/SET” button again to stop

counting. The buzzer will sound once.

3. Press “MODE” button for at least

2 seconds to set the time back to 00:00.
The buzzer will sound twice. The time
display and “TRIP.T” blink for 2 seconds.
Now it is ready to start counting.

UF1F12.book Page 24 Friday, May 30, 2003 11:15 AM

Содержание XLT800 WaveRunner 2004









































































































































Результаты поиска

Содержание XLT800 WaveRunner 2004

Отзывы:

Yamaha XLT800 WaveRunner 2004, Руководство владельца/оператора, Страница: 51 / 136

Результаты поиска

Содержание XLT800 WaveRunner 2004

Отзывы: