5-5
E
EJU01121
Connecting the jumper cables
1. Connect the positive (+) jumper cable
1
to the positive (+) terminals of both bat-
teries.
2. Connect one end of the negative (–)
jumper cable
2
to the negative (–) termi-
nal of the booster battery
3
.
3. Connect the other end of the negative (–)
cable to an unpainted bolt on the cylinder
head.
CAUTION:
@
Do not connect the end of the jumper
cable to the negative (–) terminal on the
watercraft battery! Be sure all connec-
tions are secure and correct before
attempting to start the engine. Any
wrong connection may damage the elec-
trical system.
@
4. Start the engine, and then disconnect
the cables by reversing the steps above.
CAUTION:
@
●
Never push the start switch while the
engine is running.
●
Do not operate the start switch for
more than 5 seconds, otherwise the
battery will be discharged and the
engine will not start. Also, the starter
motor may be damaged. If the engine
does not start in 5 seconds, release
the start switch, wait 15 seconds, and
try again.
@
E_F0M-13.book Page 5 Monday, July 2, 2001 5:44 PM
Содержание XL700 WaveRunner 2001
