Yamaha XJR1300X Скачать руководство пользователя страница 77

Страница: 77 / 94

PERIODIC MAINTENANCE AND MINOR REPAIR

6-32

EAU24360

Front wheel

EAU33681

To remove the front wheel

WARNING

EWA10820

●

It is advisable to have a Yamaha
dealer service the wheel.

●

Securely support the motor-
cycle so that there is no danger
of it falling over.

1. Place the motorcycle on the cen-

terstand.

2. Loosen the front wheel axle pinch

bolt, then the wheel axle and the
brake caliper bolts.

3. Remove the brake hose holder

and reflector on each side by re-
moving the bolt.

4. Remove the brake caliper on each

side by removing the bolts.

CAUTION:

ECA11050

Do not apply the brake after the
brake calipers have been removed,
otherwise the brake pads will be
forced shut.

5. Pull the wheel axle out, and then

remove the wheel.

EAU33770

To install the front wheel

1. Lift the wheel up between the fork

legs.

2. Insert the wheel axle.
3. Install the brake calipers by install-

ing the bolts.

NOTE:

Make sure that there is enough space
between the brake pads before install-
ing the brake calipers onto the brake
discs.

4. Install the brake hose holders and

reflectors by installing the bolts.

5. Take the motorcycle off the center-

stand so that the front wheel is on
the ground.

6. Tighten the wheel axle, the front

wheel axle pinch bolt and the
brake caliper bolts to the specified
torques.

1. Wheel axle

2. Front wheel axle pinch bolt

1. Brake caliper bolt
2. Brake hose holder

3. Reflector

4. Bolt
5. Brake caliper

Tightening torques:

Wheel axle:

72 Nm (7.2 m·kgf, 52 ft·lbf)

Front wheel axle pinch bolt:

20 Nm (2.0 m·kgf, 14 ft·lbf)

Brake caliper bolt:

40 Nm (4.0 m·kgf, 29 ft·lbf)

U5WM25E0.book Page 32 Thursday, December 13, 2007 1:10 PM

ProCarManuals.com

Содержание XJR1300X































































































Результаты поиска

Содержание XJR1300X

Отзывы:

Похожие инструкции для XJR1300X

Бренды по названию

Популярные бренды

Yamaha XJR1300X, Руководство пользователя

Результаты поиска

Содержание XJR1300X

Отзывы:

Похожие инструкции для XJR1300X

Бренды по названию

Популярные бренды