Yamaha XG250, Руководство по обслуживанию

Страница: 34 / 278

TIGHTENING TORQUES
2-18
NOTE:
●
First, tighten the lower ring nut to approximately 38 Nm (3.8 m•kg, 28 ft•lb) with a torque wrench, then
loosen the lower ring nut completely.
Retighten the lower ring nut to 4 Nm (0.4 m•kg, 2.9 ft•lb) with a torque wrench.
Rear caliper bleed screw M8 1 6 Nm (0.6 m•kg, 4.3 ft•lb)
Rear caliper and joint M10 1 26 Nm (2.6 m•kg, 19 ft•lb)
Joint and brake hose M10 1 14 Nm (1.4 m•kg, 10 ft•lb)
Union bolt M10 4 30 Nm (3.0 m•kg, 22 ft•lb)
Shift pedal M8 1 30 Nm (3.0 m•kg, 22 ft•lb)
Shift rod and nut M6 2 10 Nm (1.0 m•kg, 7.2 ft•lb)
Shift arm and engine M6 1 10 Nm (1.0 m•kg, 7.2 ft•lb)
Handle crown and inner tube M8 2 23 Nm (2.3 m•kg, 17 ft•lb)
Headlight M6 2 9 Nm (0.9 m•kg, 6.5 ft•lb)
Front fork leg cable guide M5 1 0.7 Nm (0.07 m•kg, 0.5 ft•lb)
Front brake hose and meter cable M4 1 0.5 Nm (0.05 m•kg, 0.4 ft•lb)
Grab bar M6 4 10 Nm (1.0 m•kg, 7.2 ft•lb)
Battry leads — 2 2 Nm (0.2 m•kg, 1.5 ft•lb)
Master cylinder cap (front and
rear)
— 4 2 Nm (0.2 m•kg, 1.5 ft•lb)
Throttle cable and carburetor M6 2 4 Nm (0.4 m•kg, 2.9 ft•lb)
Brake lever adjusting bolt and lock
nut
M6 1 4 Nm (0.4 m•kg, 2.9 ft•lb)
Starter cable — 1 4 Nm (0.4 m•kg, 2.9 ft•lb)
Steering shaft and cable guide M6 1 10 Nm (1.0 m•kg, 7.2 ft•lb)
Item
Thread
size
Q’ty Tightening torque Remarks