Perio
d
ic maintenance an
d
a
d
justment
9-17
9
8. Check the pre air filter element for
damage, and replace it if neces-
sary.
9. Insert the pre air filter element into
the air filter case cover.
10. Install the air filter case cover by
installing the screws.
TIP
The long screw should be installed as
shown.
11. Install the rubber plugs.
Cleanin
g
the V-
b
elt case air filter el-
ement
1. Place the vehicle on the center-
stand.
2. Remove the air filter case cover.
(See the previous section.)
3. Remove the V-belt case cover
screws.
4. Remove the air filter case bolts.
5. Lift up the air filter case slightly, re-
move the rear wheel sensor lead
from the holder, and then remove
the V-belt case cover.
1. Long screw
1
1. Screw
1. Bolt
1
1
1
UBKA10E0.book Page 17 Thursday, September 22, 2022 1:40 PM