manualshive.com logo in svg

Yamaha WR250R, Руководство пользователя

Поделиться
Скачать
Yamaha WR250R Скачать руководство пользователя страница 26

Instrument and control functions

4-7

1

2

3

4

5

6

7

8

9

10

11

12

push the “SELECT 1” button and
“SELECT 2” button together.
To reset the stopwatch to zero,
push the “RESET” button for at
least two seconds.

TIP

The stopwatch will continue counting
when the vehicle is stopped. To stop
and/or resume counting, repeat steps 2
and 3.

Auto start

1. Push the “SELECT 1” button for at

least two seconds to set the auto
start.

TIP

When the stopwatch is set to auto start,
the stopwatch indicator “

” and the

distance-compensation tripmeter indi-
cator “

” will start flashing, and the dig-

its in the display will start scrolling from
left to right.

2. When the vehicle starts moving,

the stopwatch will start counting.

3. Push the “SELECT 1” button and

“SELECT 2” button together to
stop the stopwatch.

4. To resume counting, push the “SE-

LECT 1” button and “SELECT 2”
button together again.

TIP

The stopwatch will continue counting
when the vehicle is stopped. To stop
and/or resume counting, repeat steps 3
and 4.

Measurement mode (for calibrating 
the distance-compensation tripme-
ter’s reading)

The distance-compensation tripmeter

is a feature intended to provide a more
accurate tripmeter reading for enduro
riding. Calibrating this meter in accor-
dance with the distances specified on
the enduro course map will help famil-
iarize the rider with the course. In addi-
tion, calibrating the meter may also be
necessary when using tire, wheel,
chain sprocket sizes, etc. other than
specified. For further information con-
cerning the use of this meter, please
consult your nearby Yamaha dealer.
Calibrate the distance-compensation
tripmeter as follows.
To increase the reading, push the “SE-
LECT 1” button. To decrease the read-
ing, push the “SELECT 2” button.
Pushing and holding either button will
increase or decrease the reading con-
tinuously until the button is released.

TIP

Calibrating the reading of the dis-
tance-compensation tripmeter is possi-
ble regardless of the stopwatch
operation.

2CF-9-16_E0.book  7 ページ  ２０１８年５月１０日　木曜日　午後２時６分

Downloaded from 

ManualsNet.com

 search engine

Содержание WR250R

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды