Yamaha WR 155 Скачать руководство пользователя страница 84

Страница: 84 / 92

Motorcycle care an

stora

8-4

b. Pour a teaspoonful of engine

oil into the spark plug bore.

c. Install the spark plug cap onto

the spark plug, and then place
the spark plug on the cylinder
head so that the electrodes are
grounded. (This will limit spark-
ing during the next step.)

d. Turn the engine over several

times with the starter. (This will
coat the cylinder wall with oil.)

WARNING! To prevent

am-

e or injury from sparkin

make sure to

roun

the

spark plu

electro

es while

turnin

the en

ine over.

[EWA10952]

e. Remove the spark plug cap

from the spark plug, and then
install the spark plug and the
spark plug cap.

7. Lubricate all control cables, piv-

ots, levers and pedals, as well as
the sidestand and centerstand (if
equipped).

8. Check and correct the tire air

pressure, and then lift the vehicle
so that all wheels are off the
ground. Otherwise, turn the

wheels a little once a month in or-
der to prevent the tires from be-
coming degraded in one spot.

9. Cover the muffler outlet with a

plastic bag to prevent moisture
from entering it.

10. Remove the battery and fully

charge it, or attach a maintenance
charger to keep the battery opti-
mally charged.

NOTICE:

Confirm

that the

attery an

its char

are compati

le. Do not char

e a

VRLA

attery with a convention-

al char

er.

[ECA26330]

TIP



If the battery will be removed,
charge it once a month and store
it in a temperate location between
0-30 °C (32-90 °F).



See page 7-28 for more informa-
tion on charging and storing the
battery.

UB3MEZE0.book Page 4 Thursday, December 26, 2019 2:23 PM

Содержание WR 155





























































































Результаты поиска

Содержание WR 155

Отзывы:

Похожие инструкции для WR 155

Бренды по названию

Популярные бренды

Yamaha WR 155, Руководство пользователя

Результаты поиска

Содержание WR 155

Отзывы:

Похожие инструкции для WR 155

Бренды по названию

Популярные бренды