Yamaha WOLVERINE YXE70WPXH Скачать руководство пользователя страница 49

Страница: 49 / 186

4-11

NOTICE

ECB00812

If the multi-function display indicates an
error code, the vehicle should be checked
as soon as possible in order to avoid en-
gine damage.

EBU31390

Light switch “

”

Set the switch to “

” to turn on the low

beam and the taillights.
Set the switch to “

” to turn on the high

beam and the taillights.

Set the switch to “

” to turn off the head-

lights and taillights.

NOTICE

ECB02060

Do not use the headlights with the engine
turned off for an extended period of time.
The battery may discharge to the point
that the starter motor will not operate
properly. If this should happen, remove the
battery and recharge it.

1. Light switch “

”

U2MB7BE0.book Page 11 Thursday, March 3, 2016 11:46 AM

Содержание WOLVERINE YXE70WPXH



























































































































































































Результаты поиска

Содержание WOLVERINE YXE70WPXH

Отзывы:

Yamaha WOLVERINE YXE70WPXH, Руководство пользователя, Страница: 49 / 186

Результаты поиска

Содержание WOLVERINE YXE70WPXH

Отзывы: