manualshive.com logo in svg

Yamaha WOLVERINE YFM45FXV, Руководство пользователя

Поделиться
Скачать
Yamaha WOLVERINE YFM45FXV Скачать руководство пользователя страница 60

6-9

EBU06151

Parking on a slope

1. Bring the machine to a stop by applying

the brakes.

2. Stop the engine.
3. With the brake pedal applied, shift the

drive select lever to the park position “P”. 

WARNING

POTENTIAL HAZARD
Parking on a hill or other incline.
WHAT CAN HAPPEN
The ATV could roll out of control, in-
creasing the chance of an accident.
HOW TO AVOID THE HAZARD
Avoid parking on hills or other inclines.
If you must park on an incline, place the
machine transversely across the in-
cline, apply the parking brake, and block
the front and rear wheels with rocks or
other objects.
Do not park the ATV at all on hills that
are so steep you could not walk up them
easily.

U3C210.book  Page 9  Tuesday, June 21, 2005  10:54 AM

Содержание WOLVERINE YFM45FXV



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды