Yamaha WOLVERINE 2015 Скачать руководство пользователя

Страница: 15 / 192

1-7

YAMAHA

2MB-F4897-00

WARNING

• Load or trailer may affect handling and stability.

• Do not exceed the maximum load ratings for the

cargo bed , trailer tongue, or vehicle.

• When loaded with cargo or towing a trailer:

• Reduce speed and allow more room to stop.

• Turn gradually and slowly.

• Avoid hills and rough terrain.

• Secure cargo so that it will not shift - a loose load

could change handling unexpectedly or be thrown

forward and strike occupants.

• Keep weight in the cargo bed centered side to side and

as low as possible. Top-heavy loads increase the risk of a

rollover.

• Do not tow or pull objects from any point other than

the trailer hitch bracket or winch (if installed).

• Read Owner’s Manual before loading, towing, or pulling

objects.

Improper use of cargo bed or

cage/frame can result

in severe injury or

death from loss of

control, overturn or

other accidents.

Maximum Load in Cargo Bed: 300 lbs (136 kg)

Maximum Vehicle Load: 721 lbs (327 kg)

Never carry

passengers

in cargo bed.

1HP-F2259-21

UBN57AE0.book Page 7 Tuesday, November 24, 2015 1:42 PM

Содержание WOLVERINE 2015

































































































































































































Результаты поиска

Содержание WOLVERINE 2015

Отзывы:

Похожие инструкции для WOLVERINE 2015

Бренды по названию

Популярные бренды

Yamaha WOLVERINE 2015, Руководство пользователя

Результаты поиска

Содержание WOLVERINE 2015

Отзывы:

Похожие инструкции для WOLVERINE 2015

Бренды по названию

Популярные бренды