Installing the DS-XG Driver Software for Windows NT 4.0
This section explains the procedures for installing the DS-XG device driver software on your computer.
1
Log on to Windows NT 4.0.
2
Click the [Start] button on the Windows taskbar.
3
Highlight [Settings] and click [Control Panel].
4
The Control Panel now appears. Double-click the “Multimedia” icon.
5
The Multimedia Properties window now appears. Click on the “Devices” tab.
6
The Devices page is now displayed. Verify that your computer does not contain any existing DS-XG audio devices and
then click the [Add] button.
n
Verify if DS-XG audio devices exist by double-clicking the “Audio Devices” icon. If any drivers are listed, you will need to uninstall
the device by selecting it and then clicking the [Remove] button. Click the [Yes] button to confirm and then the [Restart Now] button
to restart your computer. Once you log on to Windows NT4.0 again, open the “Devices” page and continue with the next step.
7
The “Add” window now appears. Highlight “Unlisted or Updated Driver” by clicking on it. Click the [OK] button.
8
The “Install Driver” window now appears. Insert the WF192XG Installation Wizard CD-ROM in your CD drive. In the path
box, type:
D:\drivers\winnt
n
If your CD drive is other than “D”, input the actual drive in the path box. (e.g. “E:\drivers\winnt” “F:\drivers\winnt”)
Click the [OK] button to continue.
9
The “Add Unlisted or Updated Driver” window now appears prompting you to select a language. Click on the desired
language in the list and click the [OK] button.
)
If the “Driver Exists” window appears, click the [New] button to overwrite the existing driver.
!
Windows NT will now copy the necessary files to your computer. When the “YAMAHA DS-XG Audio Driver” window
appears, verify that the MPU401 I/O address, IRQ, FM I/O address and Joystick I/O address settings are correct. Click
the [OK] button to continue.
@
The “System Setting Change” window will now appear and you will be prompted to restart your computer. Click the
[Restart Now] button.
Your computer will now restart. This completes the installation of the DS-XG device drivers.
Select “MIDI for YAMAHA DS-XG Synthesizer” for MIDI output device in the Control Panel’s Multimedia Properties.
6
WF192e/paper.qx 5/21/98 9:15 PM Page 6