Instrument operation
39
EJU44570
Multifunction information
center
The multifunction information center displays
various watercraft information.
Multifunction information center initial op-
eration
When the multifunction information center is
activated, all of the display segments come
on. After 2 seconds, the warning indicators in
the information display go off, and then the
center starts to operate normally.
Multifunction information center standby
state
If the multifunction information center does
not receive any operation input within 30 sec-
onds after the engine stops, the center will
turn off and enter a standby state. When the
engine is started again, the displays return to
their state before the center turned off, and
then the center starts to operate normally.
EJU35027
Information display
The information display shows watercraft op-
erating conditions.
EJU43832
Speedometer
The speedometer shows the watercraft
speed against water.
By switching the display units, the speed can
be shown in kilometers per hour “km/h” or
miles per hour “MPH”.
TIP:
“MPH” is selected as the display unit at the
Yamaha factory.
1
Information display
2
“WARNING” indicator light
1
2
1
Fuel level meter
2
Shift indicator (EX DELUXE / EX LIMITED)
3
Engine overheat warning indicator
4
Check engine warning indicator
5
Tachometer / hour meter / voltmeter
6
Oil pressure warning indicator
7
Fuel level warning indicator
8
Speedometer
1
Speedometer
2
5
1
3 4
6
7
8
1
UF3Y14E0.book Page 39 Friday, June 12, 2020 10:50 AM