manualshive.com logo in svg

Yamaha Warrior YFM350XRC, Руководство пользователя, Страница: 109 / 174

Поделиться
Скачать
Yamaha Warrior YFM350XRC Скачать руководство пользователя страница 109

8-2

1

2

3

4

5

6

7

8

9

10

11

12

13

14

The service information included in this man-
ual is intended to provide you, the owner, with
the necessary information for completing your
own preventive maintenance and minor re-
pairs. The tools provided in the owner’s tool kit
are sufficient for this purpose, except that a
torque wrench is also necessary to properly
tighten nuts and bolts.

NOTE:

_ 

If you do not have a torque wrench available
during a service operation requiring one, take
your machine to a Yamaha dealer to check
the torque settings and adjust them as neces-
sary. 

_

WARNING

POTENTIAL HAZARD 
Operating this ATV with improper modi-
fications. 
WHAT CAN HAPPEN 
Improper installation of accessories or
modification of this vehicle may cause
changes in handling which in some situ-
ations could lead to an accident. 
HOW TO AVOID THE HAZARD 
Never modify this ATV through improp-
er installation or use of accessories. All
parts and accessories added to this ve-
hicle should be genuine Yamaha or
equivalent components designed for
use on this ATV and should be installed
and used according to instructions. If
you have questions, consult an autho-
rized Yamaha ATV dealer.

U5NF12.book  Page 2  Wednesday, May 8, 2002  11:11 AM

Содержание Warrior YFM350XRC















































































































































































Отзывы:

Нет отзывов