Yamaha VZ200 Скачать руководство пользователя страница 35

Страница: 35 / 90

Basic components

EMU31630

Fuel management meter

This meter has functions of fuel flow meter,
total consumption display, fuel economy dis-
play, and remaining fuel display.

NOTE:

After the main switch is first turned on, all the
displays come on as a test. After a few sec-
onds, the gauge will change to normal oper-

ation.

NOTE:

The fuel management meter shows various
kinds of information when the operator uses
the “

” (set) and “

” (mode) buttons.

For details, see the attached operation man-

ual.

EMU26801

Warning system

CAUTION:

ECM00090

Do not continue to operate the engine if a
warning device has activated. Consult
your Yamaha dealer if the problem can-

not be located and corrected.

EMU26816

Overheat warning

This engine has an overheat warning device.
If the engine temperature rises too high, the
warning device will activate.

Activation of warning device

●

The engine speed will automatically de-
crease to about 2000 r/min.

●

If equipped with an overheat warning indi-
cator, it will light or blink.

●

The buzzer will sound (if equipped on the

1. Set button
2. Mode button

1. Fuel flow meter
2. Multifunction display

ZMU05438

ZMU05439

ZMU01757

ZMU04766

Содержание VZ200



























































































Результаты поиска

Содержание VZ200

Отзывы:

Похожие инструкции для VZ200

Бренды по названию

Популярные бренды

Yamaha VZ200, Руководство пользователя

Результаты поиска

Содержание VZ200

Отзывы:

Похожие инструкции для VZ200

Бренды по названию

Популярные бренды