Yamaha VX250B, Руководство пользователя

Страница: 38 / 124

E
2-15
000598
When refitting the top cowling:
1)
Set the top cowling straight down onto
the engine, being careful to avoid
catching spark plug leads or other
wires.
2) Align the three cowling hooks with the
locks on the bottom cowling.
3) Press down on the top of the cowling at
the front and both sides of the back
until the three locks click.
4) To make sure the cowling is locked
properly push the cowling from each
side. If it lifts, repeat step 3.
c C
8
Make sure the cowling lock connection
cable is operating correctly before
reinstalling the top cowling.
8
When the release lever is operated,
both front and rear cowling hooks
should be released at the same time. If
not, adjust the cable adjuster for the
rear clamps.
8
Make sure the cable operates smooth-
ly and is free of corrosion.
8
Check that the cable is properly
secured in the holder.
8
When reinstalling the cowling, insure
that both the front and rear locks have
operated properly. If the cowling has
not been locked properly some parts
may be damaged by the top cowling
shaking during operation.
q
000825
EMU01546
FLUSHING DEVICE
This device
1
is used to clean the cooling
water passages of the motor using a garden
hose and tap water.
NOTE:
Refer to “CLEANING COOLING-WATER
PASSAGES” in Chapter 4 for instructions
on usage.
69L-9-12-2 3/5/02 5:01 PM Page 16