Yamaha VX200A, Руководство пользователя

Страница: 73 / 120

E
4-6
EMU00350*
Lubrication
1) Remove the spark plug(s). Spray a
“Yamaha Stor-Rite Engine Fogging
Oil” into each cylinder for 5 seconds.
Grease the spark plug threads and
reinstall the spark plug(s) and torque
to proper specification. (Refer to
“CLEANING AND ADJUSTING
SPARK PLUG”.)
2) Turn the engine over with the stop
lanyard disconnected to work the fog-
ging oil into the piston rings.
3) Fill the oil tanks. This prevents the for-
mation of condensation. For models
with a remote tank, it may be neces-
sary to manually override the control
unit to completely fill the engine main
tank. (Refer to Filling Oil section).
4) Change the gear-case oil. (Refer to
“CHANGING GEAR OIL”). Inspect the
oil for the presence of water which
indicates a leaky seal. Seal replace-
ment should be performed by an
authorized Yamaha dealership prior
to use.
5) Grease all grease fittings. (Refer to
“GREASING”)
3) Run the engine at a fast idle for 10~15
minutes.
4) Just prior to turning off the engine,
quickly spray “Yamaha Stor-Rite
Engine Fogging Oil” (Part No. LUB-
STRRT-12-00) alternately into each
intake manifold. When properly done,
the engine will smoke excessively
and almost stall.
5) Remove the flushing attachment and
wipe off any excess water.
6) Install the silencer cover and top
cowling. Install the propeller.