–14–
E
FRONT FORK
CHAS
NOTE:
INSTALLATION
Reverse the “REMOVAL” procedure.
Note the following points.
1. Install:
Front fork(s)
Temporary tighten the pinch bolts.
Be sure the inner fork tube end is flush with the
top of the handle crown.
2. Tighten
Pinch bolts
1
(under bracket)
Cap bolt
2
(front fork)
Pinch bolt
3
(handle crown)
Pinch bolt (lower bracket):
23 Nm (2.3 m
kg, 17 ft
lb)
Cap bolt (front fork):
23 Nm (2.3 m
kg, 17 ft
lb)
Pinch bolt (handle crown):
23 Nm (2.3 m
kg, 17 ft
lb)
3. Adjust:
Front fork air pressure
Refer to “FRONT FORK ADJUSTMENT” in
the CHAPTER 2.
4. Install:
Fork brace
1
Front fender
2
5. Install:
Front wheel
Front wheel axle:
60 Nm (6.0 m
kg, 43 ft
lb)
Pinch bolt (wheel axle):
20 Nm (2.0 m
kg, 14 ft
lb)
