Yamaha VMAX VMX17L, Руководство пользователя

Страница: 22 / 120

Instrument an d control functions
4-4
4

If the engine overheats, see page
7-42 for further instructions.
EAU46443
En g ine trou b le warnin g li g ht “ ”
This warning light comes on if a prob-
lem is detected in the electrical circuit
monitoring the engine. If this occurs,
have a Yamaha dealer check the self-
diagnosis system. (See page 4-14 for
an explanation of the self-diagnosis
device.)
The electrical circuit of the warning
light can be checked by turning the key
to “ON”. The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to “ON”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
TIP
This warning light will come on when
the key is turned to “ON” and the start
switch is pushed, but this does not in-
dicate a malfunction.
EAU51662
ABS warnin g li g ht “ ”
In normal operation, the ABS warning
light comes on when the key is turned
to “ON”, and goes off after traveling at
a speed of 10 km/h (6 mi/h) or higher.
If the ABS warning light:

does not come on when the key is
turned to “ON”

comes on or flashes while riding

does not go off after traveling at a
speed of 10 km/h (6 mi/h) or high-
er
The ABS may not work correctly. If any
of the above occurs, have a Yamaha
dealer check the system as soon as
possible. (See page 4-18 for an expla-
nation of the ABS.)
WARNING
EWA16041
If the ABS warnin g li g ht d oes not g o
off after travelin g at a spee d of 10
km/h (6 mi/h) or hi g her, or if the
warnin g li g ht comes on or flashes
while ri d in g , the b rake system re-
verts to conventional b rakin g . If ei-
ther of the a b ove occurs, or if the
warnin g li g ht d oes not come on at
all, use extra caution to avoi d possi-
b le wheel lock d urin g emer g ency
b rakin g . Have a Yamaha d ealer
check the b rake system an d electri-
cal circuits as soon as possi b le.
TIP
If the start switch is pushed while the
engine is running, the ABS warning
light will come on, but this is not a mal-
function.
EAU48522
Shift timin g in d icator li g ht
This indicator light can be set to come
on and go off at the desired engine
speeds and is used to inform the rider
when it is time to shift to the next high-
er gear. (See “Select mode” on page
4-8 for an explanation on how to set
this indicator light.)
The electrical circuit of the indicator
light can be checked by turning the key
to “ON”. The indicator light should
come on for a few seconds, and then
go off.
ABS
UB8X11E0.book Page 4 Thursday, July 11, 2019 11:30 AM