Perio
d
ic maintenance an
d
a
d
justment
7-13
7
To check the en
g
ine oil level
1. After warming up the engine, wait
a few minutes for the oil to settle.
2. With the vehicle on a level surface,
hold it upright for an accurate
reading.
3. Look at the check window located
at the bottom-right side of the
crankcase.
TIP
The engine oil should be between the
minimum and maximum level marks.
4. If the engine oil is at or below the
minimum level mark, remove the
oil filler cap and add oil.
5. Check the engine oil filler cap O-
ring. Replace if damaged.
6. Install the engine oil filler cap.
To chan
g
e the en
g
ine oil (an
d
filter)
1. Start the engine, warm it up brief-
ly, and then turn it off.
2. Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap,
and then the engine oil drain bolt
and gasket.
TIP
Skip steps 4–6 if the oil filter cartridge
is not being replaced.
4. Remove the oil filter cartridge with
an oil filter wrench.
1. Engine oil level check window
2. Maximum level mark
3. Minimum level mark
2
3
1
1. Engine oil filler cap
2. O-ring
2
1
1. Engine oil filler cap
1. Engine oil drain bolt
2. Gasket
1
2
1
UB8X11E0.book Page 13 Thursday, July 11, 2019 11:30 AM
Содержание VMAX VMX17L
Страница 118: ...UB8X11E0 book Page 3 Thursday July 11 2019 11 30 AM...
Страница 120: ...DIC183 PRINTED IN JAPAN 2019 08 0 3 1 CR E...