Yamaha VL-1 Скачать руководство пользователя страница 14

Страница: 14 / 195

Feature Reference

●

General Operation

If Necessary, Press

™

(“

Efct

”)

If the miscellaneous directory is showing (in this case “

Misc

” above the

button

will be highlighted), press the

™

button below “

Efct

” on the display to select the

effect directory.

Move the Cursor To “

4:Reverberation

” and Press

[

Use the cursor buttons (or the

and

buttons, or the data dial)

to move the cursor to “

4:Reverberation

” and press the

[

button. This will

take you to the first page of reverb parameters.

NOTES

■

Notice that the top line of the display shows the “path” to the current

level or function: “

EDIT/COM/EFFECT/REVERBERATION

”.

This example illustrates the two methods used to move downward through the EDIT

mode levels: 1) press the appropriate function button and 2) move the cursor to the
desired selection and press

[

From any point within the structure you can move upward toward the topmost level

(in this case the initial EDIT mode display) by pressing the

]

button. You move up

one level each time the

]

button is pressed, until the topmost level is reached.

To exit from the EDIT mode itself you must press either the

button, depending on the mode you want to switch to. You can exit from the EDIT mode
at any level by doing this, and you will be returned automatically to the same display
page the next time you press the

button as long as the voice being edited is not

stored or a new voices is not selected.

Содержание VL-1




































































































































































































Результаты поиска

Содержание VL-1

Отзывы:

Бренды по названию

Популярные бренды

Yamaha VL-1, Справочник по функциям

Результаты поиска

Содержание VL-1

Отзывы:

Бренды по названию

Популярные бренды