Yamaha VK540EK Скачать руководство пользователя страница 30

Страница: 30 / 76

6-6

ESU01020

Skis and ski runners

Check the skis and ski runners for wear and damage.
Replace if necessary.

CAUTION:

Avoid scratching the skis when loading and unload-
ing the snowmobile, when riding in areas with little
or no snow, or on sharp edges such as concrete,
curbs, etc. This will wear or damage the skis.

ESU01030

Steering system

Check the handlebar for excessive free play:

1. Push the handlebar up and down and back and forth.
2. Turn the handlebar slightly to the right and left.

If excessive free play is noticed, consult a Yamaha
dealer.

ESU01041

Lights

Check the lights.
Replace any burned out bulbs.

ESU03020

Battery

Check the fluid level and fill if necessary.
Use only distilled water if refilling is necessary. (See
page 8-24 for more details.)

ESU01100

Fittings and fasteners

Check the tightness of the fittings and fasteners.
Tighten in proper sequence and torque if necessary.

Ski runner wear limit

8 mm (0.31 in)

Ski wear limit

25 mm (0.98 in)

U8AC1B.book Page 6 Thursday, April 8, 2004 12:57 PM

Содержание VK540EK













































































Результаты поиска

Содержание VK540EK

Отзывы:

Похожие инструкции для VK540EK

Бренды по названию

Популярные бренды

Yamaha VK540EK, Руководство пользователя

Результаты поиска

Содержание VK540EK

Отзывы:

Похожие инструкции для VK540EK

Бренды по названию

Популярные бренды