manualshive.com logo in svg

Yamaha VK540EG, Руководство пользователя, Страница: 8 / 76

Поделиться
Скачать
Yamaha VK540EG Скачать руководство пользователя страница 8

1-1

ESU00004

YAMAHA MOTOR CORPORATION, U.S.A.

SNOWMOBILE LIMITED WARRANTY

Yamaha Motor Corporation, U.S.A. hereby warrants that
new Yamaha snowmobiles purchased from an autho-
rized Yamaha snowmobile dealer in the continental United
States will be free from defects in material and workman-
ship for the period of time stated herein, subject to certain
stated limitations.

WARRANTY PERIOD:

1. All Yamaha snowmobiles shall be warranted for a

term of one (1) year from the date of purchase, plus
a special early-season extension (if applicable).

2. All Yamaha snowmobile clutch components are war-

ranted against abnormal wear for one (1) year from
the date of purchase, plus a special early-season
extension (if applicable).

DURING THE PERIOD OF WARRANTY 

any au-

thorized Yamaha snowmobile dealer will, free of charge,
repair or replace, at Yamaha’s option, any part adjudged
defective by Yamaha due to faulty workmanship or
material from the factory. Parts used in warranty repairs
will be warranted for the balance of the snowmobile’s
warranty period. All parts replaced under warranty be-
come the property of Yamaha Motor Corporation, U.S.A.

GENERAL EXCLUSIONS 

from this warranty shall

include any failures to the machine caused by:
1. Competition, racing, or non-Yamaha authorized rental

use.

2. Operation on surfaces other than snow or ice.
3. Installation of parts or accessories that are not quali-

tatively equivalent to genuine Yamaha parts.

4. Abnormal strain, neglect, or abuse.
5. Lack of proper maintenance.
6. Accident or collision damage.
7. Modification to original parts.

SPECIFIC EXCLUSIONS 

from this warranty shall

include parts replaced due to normal wear or routine
maintenance including oil, spark plugs, clutch drive belts,
slide runners, and track.

THE CUSTOMER’S RESPONSIBILITY 

under this

warranty shall be to:
1. Operate and maintain the snowmobile as specified in

the appropriate Owner’s Manual.

2. Give notice to an authorized Yamaha snowmobile

dealer of any and all apparent defects within ten (10)
days after discovery, and make the machine avail-
able at that time for inspection and repairs at such
dealer’s place of business. You may locate your
nearest authorized Yamaha dealer through your
local telephone directory.

WARRANTY TRANSFER: 

To transfer any remain-

ing warranty from the original purchaser to any subse-
quent purchaser, it is imperative that the machine be
inspected and registered for warranty by an authorized
Yamaha snowmobile dealer. In order for this warranty to
remain in effect, this inspection and registration must
take place within ten (10) days after ownership transfer.
An inspection and registration fee will be charged for this
service.

YAMAHA MOTOR CORPORATION, U.S.A.
MAKES NO OTHER WARRANTY OF ANY KIND,
EXPRESSED OR IMPLIED. ALL IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE WHICH
EXCEED THE OBLIGATIONS AND TIME LIM-
ITS STATED IN THIS WARRANTY ARE HEREBY
DISCLAIMED BY YAMAHA MOTOR CORPO-
RATION, U.S.A. AND EXCLUDED FROM THIS
WARRANTY.

SOME STATES DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU. ALSO EXCLUDED FROM
THIS WARRANTY ARE ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES INCLUDING
LOSS OF USE. SOME STATES DO NOT AL-
LOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAM-
AGES, SO THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LE-
GAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE
TO STATE.

Содержание VK540EG













































































Отзывы:

Нет отзывов