manualshive.com logo in svg

Yamaha VK10X, Руководство пользователя

Поделиться
Скачать
Yamaha VK10X Скачать руководство пользователя страница 60

Periodic maintenance

54

ESU12130

Brake and parking brake 

WARNING

EWS00440

●

A soft, spongy feeling in the brake lever
indicates a failure in the brake system.

●

Do not operate the snowmobile if you
find any problems in the brake system.
You could lose braking ability, which
could lead to an accident. Ask a Yamaha
dealer to inspect and repair the brake
system.

CAUTION:

ECS00060

Make sure that the brake lever end does
not project out over the handlebar end.
This will help prevent brake lever damage
when the snowmobile is placed on its side
for service.

Test the brake at a low speed when starting
out to make sure that it is working properly. If
the brake does not provide proper braking
performance, inspect the brake for wear or
brake fluid leakage. (See the following section
for more details.)

Checking the brake pads

Check the brake pads for wear.
If the brake pads reach the wear limit, ask a
Yamaha dealer to replace them.

Checking the parking brake pads

Check the parking brake pads for wear by
measuring the thickness of the pads. If the
parking brake pads reach the wear limit, ask a
Yamaha dealer to replace them.

To adjust the parking brake
As the parking brake pads wear, adjustment
may be necessary to ensure proper brake
performance.

WARNING

EWS00450

Be sure to have a Yamaha dealer make this
adjustment.

1. Locknut

2. Chain tension adjusting bolt

1. Brake pad wear indicator

2. Brake pad wear limit

Brake pad wear limit:

4.7 mm (0.19 in)

1. Parking brake pad wear limit

Parking brake pad wear limit:

1.2 mm (0.047 in)

U8GS11E0.book  Page 54  Friday, April 20, 2007  11:01 AM

Содержание VK10X

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды