Yamaha VINO XC50Z, Руководство пользователя

Страница: 59 / 84

6-59
1
2
3
4
5
6
7
8
9
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
6-23
EAU24133
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
2
1
ZAUM00**
1. Tail/brake light lens
2. Bulb
2. Remove the burnt-out bulb by push-
ing it in and turning it counterclock-
wise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
NOTICE: Do not over-
tighten the screws, otherwise the
lens may break.
[ECA10681]
Tail/brake light bulb, replacing<IXE>
Turn signal light bulb, replacing<IXE>
EAU24204
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
ZAUM00**
2
1. Turn signal light lens
2. Bulb
3. Remove the headlight bulb holder
by turning it counterclockwise, and
then remove the burnt-out bulb.
1
ZAUM00**
1. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Install the headlight bulb cover, and
then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.