
9-12
9
3. Lift the cargo bed up. (See page 5-25 for
cargo bed lifting and lowering proce-
dures.)
4. Remove the engine oil dipstick, and then
wipe it off with a clean rag.
5. Insert the dipstick completely into the oil
filler hole, and then remove it again to
check the oil level.
TIP
The engine oil should be between the mini-
mum and maximum level marks.
6. If the engine oil is at or below the mini-
mum level mark, remove the right rear
panel, and then add sufficient oil of the
recommended type to raise it to the cor-
rect level. (See page 9-10 for right rear
panel removal and installation proce-
dures.)
7. Insert the dipstick completely into the oil
filler hole, and then install the panel.
8. Lower the cargo bed.
1. Engine oil dipstick
1
1. Maximum level mark
2. Minimum level mark
3. Oil filler hole
1
2
3
UBHE11E0.book Page 12 Friday, October 1, 2021 9:19 AM
Содержание VIKING VI 2021
Страница 9: ...INDEX 13 1 UBHE11E0 book Page 4 Friday October 1 2021 9 19 AM...
Страница 12: ...1 3 1 1 Key identification number 1 UBHE11E0 book Page 3 Friday October 1 2021 9 19 AM...
Страница 14: ...2 2 2 13 14 12 12 UBHE11E0 book Page 2 Friday October 1 2021 9 19 AM...
Страница 174: ...DIC183 PRINTED IN USA 2021 10 0 5 1 CR E...