manualshive.com logo in svg

Yamaha Versity VP300, Руководство пользователя

Поделиться
Скачать
Yamaha Versity VP300 Скачать руководство пользователя страница 60

PERIODIC MAINTENANCE AND MINOR REPAIR

6

Tightening torque:

Spark plug:

17.5 Nm (1.75 m

•

kg)

NOTE :
If a torque wrench is not available when
installing a spark plug, a good estimate
of the correct torque is 1/4 – 1/2 turn
past finger tight. However, the spark
plug should be tightened to the
specified torque as soon as possible.

4. Install the spark plug cap.
5. Install the cowling.

6-13

EAUM0103*

Engine oil

The engine oil level should be checked
before each ride. In addition, the oil
must be changed at the intervals
specified in the periodic maintenance
and lubrication chart and when the oil
change indicator comes on.

To check the engine oil level

1. Place the scooter on the

centerstand.

NOTE :
Make sure that the scooter is positioned
straight up when checking the oil level.
A slight tilt to the side can result in a
false reading.

2. Start the engine, warm it up for

several minutes, and then turn it
off.

Содержание Versity VP300









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды