manualshive.com logo in svg

Yamaha Versity 300, Руководство пользователя

Поделиться
Скачать
Yamaha Versity 300 Скачать руководство пользователя страница 74

PERIODIC MAINTENANCE AND MINOR REPAIR

6

EAU03371

Checking and lubricating the
centerstand and sidestand

The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-to-
metal contact surfaces should be
lubricated if necessary.

EW000114

If the centerstand or sidestand does
not move up and down smoothly,
have a Yamaha dealer check or
repair it.

1. Sidestand

1. Centerstand

WARNING

Recommended lubricant:

Lithium-soap-based grease
(all-purpose grease)

EAU02939

Checking the front fork

The condition and operation of the front
fork must be checked as follows at the
intervals specified in the periodic main-
tenance and lubrication chart.

To check the condition

EW000115

Securely support the scooter so that
there is no danger of it falling over.

Check the inner tubes for scratches,
damage and excessive oil leakage.

WARNING

6-27

1

ZAUM0454

1

ZAUM0455

Содержание Versity 300









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды