Yamaha VERSITY 300 VP300 Скачать руководство пользователя

Страница: 24 / 84

INSTRUMENT AND CONTROL FUNCTIONS

3-9

EAU12950

Rear brake lever

The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the handle-
bar grip.

EAU13140

Fuel tank cap

To remove the fuel tank cap

1. Open the seat. (See page 3-11.)

2. Insert the key into the lock and turn

it 1/4 turn clockwise. The lock will
be released and the fuel tank cap
can be removed.

To install the fuel tank cap

1. Insert the fuel tank cap into the

tank opening with the marks on the
cap and tank aligned.

2. Turn the key counterclockwise to

the original position, and then re-
move it.

3. Close the seat.

NOTE:

The fuel tank cap cannot be installed
unless the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly installed and locked.

WARNING

EWA10120

Make sure that the fuel tank cap is
properly closed and locked before
riding.

1. Rear brake lever

ZAUM0085

1. Fuel tank cap

ZAUM0409

Содержание VERSITY 300 VP300





















































































Результаты поиска

Содержание VERSITY 300 VP300

Отзывы:

Похожие инструкции для VERSITY 300 VP300

Бренды по названию

Популярные бренды

Yamaha VERSITY 300 VP300, Руководство пользователя

Результаты поиска

Содержание VERSITY 300 VP300

Отзывы:

Похожие инструкции для VERSITY 300 VP300

Бренды по названию

Популярные бренды