background image

Introduction

ESU10122

Congratulations on your purchase of a
Yamaha snowmobile. This model is the result
of Yamaha’s vast experience in the produc-
tion of fine sporting and touring snowmo-
biles. It represents the high degree of
craftsmanship and reliability that have made
Yamaha a leader in these fields.
This manual will give you an understanding of
the operation, inspection, and basic mainte-
nance of this snowmobile. If you have any
questions concerning the operation or main-
tenance of your snowmobile, please consult
a Yamaha dealer.
Yamaha continually seeks advancements in
product design and quality. Therefore, while
this manual contains the most current prod-
uct information available at the time of print-
ing, there may be minor discrepancies
between your snowmobile and this manual. If
there is any question concerning this manual,
please consult a Yamaha dealer.

WARNING

EWS00671

Please read this manual carefully before
operating this snowmobile. Do not at-
tempt to operate this snowmobile until
you have attained adequate knowledge of
its controls and operating features.
Regular inspections and careful mainte-
nance, along with good operating techni-
ques, will help ensure that you safely enjoy
the capabilities and reliability of this snow-
mobile.

PZ5NXJ
PZ5NTJ

OWNER’S MANUAL

©2017 by Yamaha Motor Corporation, 

U.S.A.

1st Edition, February 2017

All rights reserved.

Any reprinting or unauthorized use 

without the written permission of

Yamaha Motor Corporation, U.S.A.

is expressly prohibited.

Printed in Japan.

P/N LIT-12628-03-42

U8GK7AE0.book  Page 1  Thursday, June 1, 2017  1:57 PM

Downloaded from 

ManualsNet.com

 search engine

Содержание VENTURE PZ5NXJ

































































































Отзывы: