Yamaha V-MAX SHO VF250 Скачать руководство пользователя

Страница: 36 / 36

Reliability Starts Here

When it comes to boats and outboards, you get out of them what you put

into them. That’s why proper maintenance and care is so very important,

and you are a big part of making sure it’s done and done right. It helps

maintain the value of your investment and provide years of trouble-free

fun on the water.

Proper maintenance isn’t expensive or overly difficult to do. Yamaha’s

Maintenance Matters contains simple, easy-to-understand information

about what to do, how to do it, when to do it and the proper materials

to do it with. Additional information and assistance are as close as

Maintenance.YamahaOutboards.com

and/or your local authorized

Yamaha Marine dealer. Do it yourself, or enlist the highly trained

services of your Yamaha dealer to help.

Either way, you’ll know that by insisting on Genuine Yamaha maintenance

and care products, and by following Yamaha-recommended guidelines,

your outboard will be receiving the best of care. In return, it will reward

you with year after year of relaxation and enjoyment.

Insist on Yamaha, and only Yamaha.

*Message and data rates may apply. May not be available on all devices.

For the name of your Yamaha Marine dealer or for more information on our complete line of Yamaha Outboards,

call 1-800-88-YAMAHA or visit us at YamahaOutboards.com.

REMEMBER to always observe all applicable boating laws. Never drink and drive. Dress properly with a USCG-approved personal

floatation device and protective gear. This document contains many of Yamaha’s valuable trademarks. It may also contain trademarks

belonging to other companies. Any references to other companies or their products are for identification purposes only, and are not

intended to be an endorsement.

LIT-MNT-MTR-S15

LIT-MNTMT-RS-15

Содержание V-MAX SHO VF250





































Результаты поиска

Содержание V-MAX SHO VF250

Отзывы:

Похожие инструкции для V-MAX SHO VF250

Бренды по названию

Популярные бренды

Yamaha V-MAX SHO VF250, Руководство по обслуживанию

Результаты поиска

Содержание V-MAX SHO VF250

Отзывы:

Похожие инструкции для V-MAX SHO VF250

Бренды по названию

Популярные бренды