9
English
1
Turn the power on.
2
Select the reception band confirming it on the display.
3
4
Tune to a desired station manually.
* To continue tuning search, press and hold the button.
1
Turn the power on.
2
Select the reception band confirming it on the display.
3
4
To tune to a higher frequency, press the UP button.
To tune to a lower frequency, press the DOWN button.
* If the station where tuning search stops is not the desired
one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.
TUNING OPERATIONS
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
Notes
•
If you tune to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
•
When tuned in to a station, the frequency of the received
station is shown on the display. If an RDS station that
employs PS data service is received, the frequency is then
replaced by the station name. Refer to page 15 for details.
AUTOMATIC TUNING
MANUAL TUNING
FM/MW/LW
TUNING MODE
AUTO/MAN'MONO
TUNING MODE
AUTO/MAN'MONO
POWER
POWER
TUNING
PTY SELECTOR
DOWN
UP
TUNING
DOWN
UP
Turn “AUTO” off.
or
,
AUTO
1
4
3
2
* Parts in shaded area ( ) are present on
TX-492RDS only.
TX-492RDS
FM/AM
or
TX-492
FM/MW/LW
or
,
TX-492RDS
FM/AM
or
TX-492
TX-492RDS
TX-492
TUNING
PTY SELECTOR
DOWN
UP
TUNING
DOWN
UP
TX-492RDS
TX-492
TX-492RDS only
