PERIODIC MAINTENANCE AND MINOR REPAIR
6-11
1
2
8
9
4. Remove the sponge material from
the air filter element frame, clean it
with solvent, and then squeeze the
remaining solvent out.
5. Apply oil of the recommended type
to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.
NOTE:
The sponge material should be wet but
not dripping.
6. Pull the sponge material over the
air filter element frame.
7. Insert the element into the air filter
case.
CAUTION:
ECA10480
●
Make sure that the air filter ele-
ment is properly seated in the
air filter case.
●
The engine should never be op-
erated without the air filter ele-
ment installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.
8. Install the air filter case cover by in-
stalling the screws.
9. Install the panel.
To clean the air filter check hose
1. Check the hose at the bottom of
the air filter case for accumulated
dirt or water.
2. If dirt or water is visible, remove
the hose, clean it, and then install
it.
1. Sponge material
2. Air filter element frame
1
2
Recommended oil:
Foam air filter oil
1. Hose
1
ProCarManuals.com
Содержание TW200ET
Страница 2: ...US_hyoushi2 3 4 30 03 3 06 PM Page 1 ProCarManuals com ...
Страница 84: ...ProCarManuals com ...
Страница 85: ...US_hyoushi2 3 4 30 03 3 06 PM Page 1 ProCarManuals com ...