Yamaha TTR 125 2020, Руководство пользователя

Страница: 45 / 86

Perio d ic maintenance an d a d justment
7-10
7
NOTICE
ECA10441
After chan g in g the en g ine oil, b e
sure to check the oil pressure as d e-
scri b e d b elow.
10. Remove the bleed bolt, start the
engine and keep it idling until oil
flows out. If no oil comes out after
several minutes, turn the engine
off immediately and consult a
Yamaha dealer for inspection.
11. After checking the oil pressure,
tighten the bleed bolt to the spec-
ified torque.
EAUW0522
Cleanin g the air filter element
an d check hoses
The air filter element should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
Clean the air filter element more fre-
quently if you are riding in unusually
wet or dusty areas. The air filter check
hoses must be frequently checked and
cleaned if necessary.
Cleanin g the air filter element
1. Remove panel A. (See page 7-6.)
2. Remove the air filter case cover by
removing the band.
3. Pull the air filter element out of the
air filter case.
4. Remove the wing nut, and then
pull the air filter element off the
guide.
5. Remove the sponge material from
the air filter element frame.
1. Bleed screw
Ti g htenin g torque:
Bleed bolt:
7 N·m (0.7 kgf·m, 5.2 lb·ft)
1. Band
2. Air filter case cover
1. Air filter element
2. Nut
3. Washer
4. Air filter sponge material
5. Air filter element guide
U2PT17E0.book Page 10 Monday, March 30, 2020 2:13 PM