Yamaha TT-R230B, Руководство пользователя

Страница: 42 / 80

PERIODIC MAINTENANCE AND ADJUSTMENT
7-11
7
3. Remove the wing nut and washer
from the air filter element.
4. Remove the sponge material from
the air filter element frame.
5. Clean the sponge material with
solvent, and then squeeze the re-
maining solvent out.
WARNING!
To avoid the risk of fire or explo-
sion, do not use gasoline or sol-
vents with a low flash point.
[EWAW0021]
NOTICE: To avoid dam-
aging the foam material, handle
it gently and carefully, and do
not twist or wring it.
[ECA10511]
6. Apply oil of the recommended type
to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.
TIP
The sponge material should be wet but
not dripping.
7. Pull the sponge material over the
air filter element frame.
8. Install the washer and wing nut,
and then insert the air filter ele-
ment into the air filter case.
NOTICE: Make sure that the air
filter element is properly seated
1. Air filter element
1. Nut
2. Washer
1. Sponge material
2. Air filter element frame
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
U1C618E0.book Page 11 Thursday, June 2, 2011 1:09 PM